1) FR HSF
FR (Flame Retardant) insulation 70°C
Hazardous substance free
Does not propagate flame & fire.
Application : Flexible single core cable with Flame Retardant PVC insulation. This cable can be used in panels, cabinets, machines and internal wirings with switchgears, relays, controllers, equipments, controls units, etc.
Hazardous substance free
Does not propagate flame & fire.
Application : Flexible single core cable with Flame Retardant PVC insulation. This cable can be used in panels, cabinets, machines and internal wirings with switchgears, relays, controllers, equipments, controls units, etc.
Technical Data
- Approvals: IS 694 marked, FIA / TAC
- Cable Code: Y (FR)
- oltage Grade: Up to and including 1100V
- Conductor: Flexible electrolytic annealed plain copper, class 5, IS 8130
- Insulation: FR (Flame Retardant) PVC, IS 5831
- Packing: 200 mtr. In polybag packing or 180 mtr. coil packed in protective cartons Properties
- Temperature range: -15°C to +70°C
- Max. short circuit temperature rating: 160°C
- Self-extinguishing and flame retardant according to IS 10810 P - 61
- Free from 200+ hazardous substance (REACH Compliant) Cabel Design Parameters
| Part Number |
Nominal Cross Sectional Area (sq, mm) |
No of Strands/Max. strand dia. (mm) | Nominal Insulation Thickness (mm ) | Maximum Diameter Over insulation (mm) | Max. current carrying capacity (A) |
| 02090101xx20 | 0.5 | 16/0.2 | 0.6 | 2.6 | 5 |
| 02090102xx20 | 0.75 | 24/0.2 | 0.6 | 2.8 | 8 |
| 02090103xx20 | 1 | 32/0.2 | 0.6 | 3.0 | 13 |
| 02090104xx20 | 1.5 | 30/0.25 | 0.7 | 3.4 | 17 |
| 02090105xx20 | 2.5 | 50/0.25 | 0.8 | 4.1 | 24 |
| 02090106xx20 | 4 | 56/0.30 | 0.8 | 4.8 | 30 |
| 02090107xx20 | 6 | 84/0.30 | 0.8 | 5.3 | 38 |
| 02090108xx20 | 10 | 140/0.30 | 1.0 | 7.0 | 52 |
| 02090109xx20 | 16 | 126/0.40 | 1.0 | 8.1 | 70 |
| 02090110xx20 | 25 | 196/0.40 | 1.2 | 10.2 | 88 |
| 02090111xx20 | 35 | 276/0.40 | 1.2 | 11.7 | 112 |
| 02090112xx20 | 50 | 396/0.40 | 1.4 | 13.9 | 146 |
| 02090113xx20 | 70 | 360/0.50 | 1.4 | 16.0 | 216 |
| 02090114xx20 | 95 | 480/0.50 | 1.6 | 18.2 | 262 |
| 02090115xx20 | 120 | 608/0.50 | 1.6 | 20.2 | 310 |
| 02090116xx20 | 150 | 750/0.50 | 1.8 | 22.5 | 355 |
| 02090117xx20 | 185 | 931/0.50 | 2.0 | 24.9 | 415 |
| 02090118xx20 | 240 | 1200/0.50 | 2.2 | 28.4 | 500 |
| 02090119xx20 | 300 | 1500/0.50 | 2.4 | 31.0 | 550 |
2) RR KABEL FR-LSH
FR-LSH (Flame Retardant Low Smoke and Halogen) insulation 70°C
Does not propagate flame & fire
Reduced Smoke and acid gas emission
Application : Flexible single core cable with FR-LSH (Flame Retardant Low Smoke and Halogen) PVC insulation. This cable can be used in panels, cabinets, machines and internal wirings with switchgears, relays, controllers, equipments, controls units, etc. specially in hazard prone areas. They also find their usage in flexible wiring installations in industrial and commercial areas with dense population.
Technical Data :
Does not propagate flame & fire
Reduced Smoke and acid gas emission
Application : Flexible single core cable with FR-LSH (Flame Retardant Low Smoke and Halogen) PVC insulation. This cable can be used in panels, cabinets, machines and internal wirings with switchgears, relays, controllers, equipments, controls units, etc. specially in hazard prone areas. They also find their usage in flexible wiring installations in industrial and commercial areas with dense population.
Technical Data :
- Approvals: IS 694 marked, FIA/TAC
- Cable Code: Y (FR-LSH)
- Voltage Grade: Up to and including 1100V
- Conductor: Flexible electrolytic annealed plain copper, class 5, IS 8130
- Insulation: Specially formulated FR-LSH (Flame Retardant Low Smoke and Halogen) PVC, IS 5831
- Packing: 200 mtr. In polybag packing or 180 mtr. coil packed in protective cartons Properties
- Temperature range: -15°C to +70°C
- Reduced smoke emission provides higher visibility
- Minimized acid gas generation
- Max. short circuit temperature rating: 160°C
- Self-extinguishing and flame retardant according to IS 10810 P - 61
- Free from 200+ hazardous substance Cabel Design Parameters
| Part Number |
Nominal Cross Sectional Area (sq, mm) |
No of Strands / Max. strand dia. (mm) | Nominal Insulation Thickness (mm ) | Maximum Diameter Over insulation (mm) | Max. current carrying capacity (A) |
| 02080101xx50 | 0.5 | 16/0.2 | 0.6 | 2.6 | 5 |
| 02080102xx50 | 0.75 | 24/0.2 | 0.6 | 2.8 | 8 |
| 02080103xx50 | 1 | 32/0.2 | 0.6 | 3.0 | 13 |
| 02080104xx50 | 1.5 | 30/0.25 | 0.7 | 3.4 | 17 |
| 02080105xx50 | 2.5 | 50/0.25 | 0.8 | 4.1 | 24 |
| 02080106xx50 | 4 | 56/0.30 | 0.8 | 4.8 | 30 |
| 02080107xx50 | 6 | 84/0.30 | 0.8 | 5.3 | 38 |
| 02080108xx50 | 10 | 140/0.30 | 1.0 | 7.0 | 52 |
| 02080109xx50 | 16 | 126/0.40 | 1.0 | 8.1 | 70 |
| 02080110xx50 | 25 | 196/0.40 | 1.2 | 10.2 | 88 |
| 02080111xx50 | 35 | 276/0.40 | 1.2 | 11.7 | 112 |
| 02080112xx50 | 50 | 396/0.40 | 1.4 | 13.9 | 146 |
| 02080113xx50 | 70 | 360/0.50 | 1.4 | 16.0 | 216 |
| 02080114xx50 | 95 | 480/0.50 | 1.6 | 18.2 | 262 |
| 02080115xx50 | 120 | 608/0.50 | 1.6 | 20.2 | 310 |
| 02080116xx50 | 150 | 750/0.50 | 1.8 | 22.5 | 355 |
| 02080117xx50 | 185 | 931/0.50 | 2.0 | 24.9 | 415 |
| 02080118xx50 | 240 | 1200/0.50 | 2.2 | 28.4 | 500 |
| 02080119xx50 | 300 | 1500/0.50 | 2.4 | 31.0 | 550 |
3) LS0H-FR
Flexible single core cable with Halogen Free Flame Retardant insulation. These are suitable for flexible installations preferably in panels, cabinets, machinaries, controllers, equipments used in chemical industries, oil and gas industries, in explosive or fire prone areas where safety is utmost important. They also find their usage in flexible wiring installations in industrial and commercial areas with dense population.
Technical Data
- Approvals: IS 17048 marked, FIA / TAC
- Cable Code: Z
- Voltage Grade: Up to and including 1100V
- Conductor: Flexible electrolytic annealed plain copper, class 5, IS 8130
- Insulation: HFI-TP 70, Thermoplastic halogen free flame retardant.
- Packing: 200 mtr. In polybag packing or 180 mtr. coil packed in protective cartons Properties
- Temperature range: -15°C to +70°C
- Max. short circuit temperature rating: 160°C
- Self-extinguishing and flame retardant according to IS 10810 P - 61
- Free from 200+ hazardous substance (REACH Compliant) Cabel Design Parameters
| Part Number | Nominal Cross Sectional Area (sq, mm) |
No of Strands/Max. strand dia. (mm) | Nominal Insulation Thickness (mm ) | Maximum Diameter Over insulation (mm) | Max. current carrying capacity (A) |
| 02070101xx70 | 0.5 | 16/0.2 | 0.6 | 2.6 | 5 |
| 02070102xx70 | 0.75 | 24/0.2 | 0.6 | 2.8 | 8 |
| 02070103xx70 | 1 | 32/0.2 | 0.6 | 3.0 | 13 |
| 02070104xx70 | 1.5 | 30/0.25 | 0.7 | 3.4 | 17 |
| 02070105xx70 | 2.5 | 50/0.25 | 0.8 | 4.1 | 24 |
| 02070106xx70 | 4 | 56/0.30 | 0.8 | 4.8 | 30 |
| 02070107xx70 | 6 | 84/0.30 | 0.8 | 5.3 | 38 |
| 02070108xx70 | 10 | 140/0.30 | 1.0 | 7.0 | 52 |
| 02070109xx70 | 16 | 126/0.40 | 1.0 | 8.1 | 70 |
| 02070110xx70 | 25 | 196/0.40 | 1.2 | 10.2 | 88 |
| 02070111xx70 | 35 | 276/0.40 | 1.2 | 11.7 | 112 |
| 02070112xx70 | 50 | 396/0.40 | 1.4 | 13.9 | 146 |
| 02070113xx70 | 70 | 360/0.50 | 1.4 | 16.0 | 216 |
| 02070114xx70 | 95 | 480/0.50 | 1.6 | 18.2 | 262 |
| 02070115xx70 | 120 | 608/0.50 | 1.6 | 20.2 | 310 |
| 02070116xx70 | 150 | 750/0.50 | 1.8 | 22.5 | 355 |
| 02070117xx70 | 185 | 931/0.50 | 2.0 | 24.9 | 415 |
| 02070118xx70 | 240 | 1200/0.50 | 2.2 | 28.4 | 500 |
| 02070119xx70 | 300 | 1500/0.50 | 2.4 | 31.0 | 550 |
4) H05V-K & H07V-K
Application :
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to protected from further damage resulting from fire. These cables may be installed on, in and beneath plaster, as well as in closed installation ducts. For use in public places such as: hospitals, schools, museums, airports, bus terminals, shops in general, etc., as well as in computer rooms, offices, production plants, switchboard wiring, laboratories, etc.
Standard
BS EN 50525-3-31.
Technical Data :
Standard
BS EN 50525-3-31.
Technical Data :
- Nominal Voltage : H05Z1- K Uo / U 300 / 500V; H07Z1- K Uo / U 450 / 750V
- Harmonized Designation : 0.5 mm² to 1 mm² – H05Z1- K, 1.5 mm2 to 240 mm2 - H07Z1- K
- Temperature Range : -30°C to +70°C
- Minimum Bending Radius :
- Cable diameter ≤ 8 mm: 4 x outer diameter
- Approx. diameter > 8 to 12 mm: 5 x outer diameter
- Approx. diameter > 12 mm: 6 x outer diameter
- Test Voltage: 2500V
- Cable Construction
- Conductor Class 5 flexible plain / metal coated stranded according to EN 60228. Insulation of thermoplastic halogen-free compound type TI7 to EN 50363-7.
- Smoke density to acc. to EN 61034-2.
- Halogen free acc. to EN 50525-1, EN 60754-1.
- Corrosivity acc. to EN 60754-2.
- Ozone resistant according to EN 60811-2-1 or HD 505.2.1.
- Self-extinguishing and flame retardant according to EN 60332-1-2.
- LSOH = Low Smoke Zero Halogen.
|
Part Numbers |
Nominal Cross |
Nominal Thickness |
Mean Overall Diameter Lower Limit (mm) |
Upper Limit (mm) |
Approx. Cable |
H05Z1-K |
02050101xx7c |
0.5 |
0.6 |
2.1 |
2.5 |
9 |
|
02050102xx7c |
0.75 |
0.6 |
2.2 |
2.7 |
12 |
|
02050103xx7c |
1 |
0.6 |
2.4 |
2.8 |
15 |
H07Z1-K |
02050104xx7c |
1.5 |
0.7 |
2.8 |
3.4 |
21 |
|
02050105xx7c |
2.5 |
0.8 |
3.4 |
4.1 |
33 |
|
02050106xx7c |
4 |
0.8 |
3.9 |
4.8 |
47 |
|
02050107xx7c |
6 |
0.8 |
4.4 |
5.3 |
66 |
|
02050108xx7c |
10 |
1.0 |
5.7 |
6.8 |
112 |
|
02050109xx7c |
16 |
1.0 |
6.7 |
8.1 |
170 |
|
02050110xx7c |
25 |
1.2 |
8.4 |
10.2 |
261 |
|
02050111xx7c |
35 |
1.2 |
9.7 |
11.7 |
358 |
|
02050112xx7c |
50 |
1.4 |
11.5 |
13.9 |
510 |
|
02050113xx7c |
70 |
1.4 |
13.2 |
16.0 |
703 |
|
02050114xx7c |
95 |
1.6 |
15.1 |
18.2 |
927 |
|
02050115xx7c |
120 |
1.6 |
16.7 |
20.2 |
1170 |
|
02050116xx7c |
150 |
1.8 |
18.6 |
22.5 |
1459 |
|
02050117xx7c |
185 |
2.0 |
20.6 |
24.9 |
1776 |
|
02050118xx7c |
240 |
2.2 |
23.5 |
28.4 |
2333 |
5) H05V2-K & H07V2-K
Application :
Heat resistant cable designed for internal wiring in switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.
Standard
BS/VDE EN 50525-2-31.
Technical Data :
Heat resistant cable designed for internal wiring in switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.
Standard
BS/VDE EN 50525-2-31.
Technical Data :
- Voltage Rating: H05V2-K 0.5 to 1 mm² – 300 / 500V, H07V2-K 1.5 to 35 mm² – 450 / 750V
- Temperature range: -30°C to +90°C
- Minimum Bending Radius :
- Cable diameter ≤ 8 mm: 4 x outer diameter
- Approx. diameter > 8 to 12 mm: 5 x outer diameter
- Approx. diameter > 12 mm: 6 x outer diameter
- Test Voltage: 2500V
- Construction
- Conductor Class 5 flexible plain / metal coated stranded according to EN 60228.
- Insulation PVC (Polyvinyl Chloride) TI3 to BS EN 50363 - 3. Properties
|
Part Numbers |
Nominal Cross |
Nominal Thickness |
Mean Overall Diameter Lower Limit (mm) |
Upper Limit (mm) |
Approx. Cable |
H05V2-K |
02030101xx3c |
0.5 |
0.6 |
2.1 |
2.5 |
8.5 |
|
02030102xx3c |
0.75 |
0.6 |
2.2 |
2.7 |
11.5 |
|
02030103xx3c |
1 |
0.6 |
2.4 |
2.8 |
13.5 |
H07V2-K |
02030104xx3c |
1.5 |
0.7 |
2.8 |
3.4 |
20 |
|
02030105xx3c |
2.5 |
0.8 |
3.4 |
4.1 |
4.1 |
|
02030106xx3c |
4 |
0.8 |
3.9 |
4.8 |
46 |
|
02030107xx3c |
6 |
0.8 |
4.4 |
5.3 |
65 |
|
02030108xx3c |
10 |
1.0 |
5.7 |
6.8 |
110 |
|
02030109xx3c |
16 |
1.0 |
6.7 |
8.1 |
167 |
|
02030110xx3c |
25 |
1.2 |
8.4 |
10.2 |
257 |
|
02030111xx3c |
35 |
1.2 |
9.7 |
11.7 |
358 |
6) H05Z-K & H07Z-K
Application :
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to be protected from further damage resulting from fire. These cables may be installed on, in and beneath plaster, as well as in closed installation ducts. The direct operating voltages is permitted up to 900 V against ground when they are used in rail-coaches. For the inner wiring of switch boards and distributors these are to be used with an alternating nominal voltage up to 1000V or a direct voltage up to 750V against ground.
Standard
BS EN 50525-3-41.
Technical Data
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to be protected from further damage resulting from fire. These cables may be installed on, in and beneath plaster, as well as in closed installation ducts. The direct operating voltages is permitted up to 900 V against ground when they are used in rail-coaches. For the inner wiring of switch boards and distributors these are to be used with an alternating nominal voltage up to 1000V or a direct voltage up to 750V against ground.
Standard
BS EN 50525-3-41.
Technical Data
- Nominal Voltage : H05Z-K Uo / U 300 / 500V, H07Z-K Uo / U 450 / 750V
- Harmonised Designation: 0.5 mm² to 1 mm² - H05Z-K, 1.5 mm² to 240 mm² - H07Z-K
- Temperature Range: -15°C to +90°C
- Minimum Bending Radius :
- Cable diameter ≤ 8 mm: 4 x outer diameter
- Approx. diameter > 8 to 12 mm: 5 x outer diameter
- Approx. diameter > 12 mm: 6 x outer diameter
- Test Voltage: 2500V
- Cable Construction
|
Part Numbers |
Nominal Cross |
Nominal Thickness |
Mean Overall Diameter |
Upper Limit (mm) |
Approx. Cable |
|
02040101xx6c |
0.5 |
0.6 |
1.9 |
2.4 |
9 |
H05Z-K |
02040102xx6c |
0.8 |
0.6 |
0.8 |
2.6 |
12 |
|
02040103xx6c |
1 |
0.6 |
2.2 |
2.8 |
15 |
H07Z-K |
02040104xx6c |
1.5 |
0.7 |
1.5 |
3.5 |
21 |
|
02040105xx6c |
2.5 |
0.8 |
3.4 |
4.3 |
33 |
|
02040106xx6c |
4 |
0.8 |
3.9 |
4.9 |
47 |
|
02040107xx6c |
6 |
0.8 |
4.4 |
5.5 |
66 |
|
02040108xx6c |
10 |
1.0 |
5.7 |
7.1 |
112 |
|
02040109xx6c |
16 |
1.0 |
6.7 |
8.4 |
169 |
|
02040110xx6c |
25 |
1.2 |
8.4 |
10.6 |
260 |
|
02040111xx6c |
35 |
1.2 |
9.7 |
12.1 |
358 |
|
02040112xx6c |
50 |
1.4 |
11.5 |
14.4 |
509 |
|
02040113xx6c |
70 |
1.4 |
13.2 |
16.61 |
701 |
|
02040114xx6c |
95 |
1.6 |
15.1 |
18.8 |
925 |
|
02040115xx6c |
120 |
1.6 |
16.7 |
20.9 |
1168 |
|
02040116xx6c |
150 |
1.8 |
18.6 |
23.3 |
1456 |
|
02040117xx6c |
185 |
2.0 |
20.6 |
25.8 |
1773 |
|
02040118xx6c |
240 |
2.2 |
23.5 |
29.4 |
2329 |
7) H05Z1-K & H07Z1-K
Application :
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to protected from further damage resulting from fire. These cables may be installed on, in and beneath plaster, as well as in closed installation ducts. For use in public places such as: hospitals, schools, museums, airports, bus terminals, shops in general, etc., as well as in computer rooms, offices, production plants, switchboard wiring, laboratories, etc.
Standard
BS EN 50525-3-31.
Technical Data
- Nominal Voltage : H05Z1- K Uo / U 300 / 500V; H07Z1- K Uo / U 450 / 750V
- Harmonized Designation : 0.5 mm² to 1 mm² – H05Z1- K, 1.5 mm2 to 240 mm2 – H07Z1- K
- Temperature Range : -30°C to +70°C
- Minimum Bending Radius :
- Cable diameter ≤ 8 mm: 4 x outer diameter
- Approx. diameter > 8 to 12 mm: 5 x outer diameter
- Approx. diameter > 12 mm: 6 x outer diameter
- Test Voltage: 2500V
- Cable Construction
- Conductor Class 5 flexible plain / metal coated stranded according to EN 60228. Insulation of thermoplastic halogen-free compound type TI7 to EN 50363-7.
Properties
- Smoke density to acc. to EN 61034-2.
- Halogen free acc. to EN 50525-1, EN 60754-1.
- Corrosivity acc. to EN 60754-2.
- Ozone resistant according to EN 60811-2-1 or HD 505.2.1.
- Self-extinguishing and flame retardant according to EN 60332-1-2.
- LSOH = Low Smoke Zero Halogen. Cabel Design Parameters
|
Part Numbers |
Nominal Cross |
Nominal Thickness |
Mean Overall Diameter Lower Limit (mm) |
Upper Limit (mm) |
Approx. Cable |
H05Z1-K |
02050101xx7c |
0.5 |
0.6 |
2.1 |
2.5 |
9.5 |
|
02050102xx7c |
0.75 |
0.6 |
2.2 |
2.7 |
12.5 |
|
02050103xx7c |
1 |
0.6 |
2.4 |
2.8 |
15.5 |
H07Z1-K |
02050104xx7c |
1.5 |
0.7 |
2.8 |
3.4 |
21.5 |
|
02050105xx7c |
2.5 |
0.8 |
3.4 |
4.1 |
33.5 |
|
02050106xx7c |
4 |
0.8 |
3.9 |
4.8 |
48 |
|
02050107xx7c |
6 |
0.8 |
4.4 |
5.3 |
67 |
|
02050108xx7c |
10 |
1.0 |
5.7 |
6.8 |
113 |
|
02050109xx7c |
16 |
1.0 |
6.7 |
8.1 |
171 |
|
02050110xx7c |
25 |
1.2 |
8.4 |
10.2 |
262 |
|
02050111xx7c |
35 |
1.2 |
9.7 |
11.7 |
360 |
|
02050112xx7c |
50 |
1.4 |
11.5 |
13.9 |
513 |
|
02050113xx7c |
70 |
1.4 |
13.2 |
16.0 |
705 |
|
02050114xx7c |
95 |
1.6 |
15.1 |
18.2 |
931 |
|
02050115xx7c |
120 |
1.6 |
16.7 |
20.2 |
1175 |
|
02050116xx7c |
150 |
1.8 |
18.6 |
22.5 |
1264 |
|
02050117xx7c |
185 |
2.0 |
20.6 |
24.9 |
1783 |
|
02050118xx7c |
240 |
2.2 |
23.5 |
28.4 |
2341 |
8) BS 6231 CK 90°C
Application :
High temperature, flame retardant cable designed for use in switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.
Standard
BS6231 Type CK.
Technical Data
- Voltage Rating: 600 / 1000V
- Temperature Rating : 90°C (105°C for 15,000 hours)
- Minimum Bending Radius :
- Cable diameter ≤ 8 mm: 4 x outer diameter.
- Approx. diameter > 8 to 12 mm: 5 x outer diameter
- Approx. diameter > 12 mm: 6 x outer diameter
- Test Voltage: 4000V
- Construction
- Conductor: Conductor Class 5 flexible plain/metal coated stranded according to EN 60228 cl. 5.
- Insulation: PVC (Polyvinyl Chloride) TI3 to BS EN 50363-3. Properties
| Part Numbers | Nominal Cross Sectional Area (Sq. mm) |
Nominal Thickness of Insulation (mm) |
Mean Overall Diameter Lower Limit (mm) |
Upper Limit(mm) | Approx. Cable Weight (kg/km) |
| 02060101xx3c | 0.5 | 0.8 | 2.4 | 3.0 | 11 |
| 02060102xx3c | 0.75 | 0.8 | 2.6 | 3.1 | 14 |
| 02060103xx3c | 1 | 0.8 | 2.7 | 3.3 | 16 |
| 02060104xx3c | 1.5 | 0.8 | 3.0 | 3.6 | 21 |
| 02060105xx3c | 2.5 | 0.8 | 3.4 | 4.1 | 32 |
| 02060106xx3c | 4 | 0.8 | 3.9 | 4.8 | 46 |
| 02060107xx3c | 6 | 0.8 | 4.4 | 5.3 | 64 |
| 02060108xx3c | 10 | 1.0 | 5.7 | 7.2 | 109 |
| 02060109xx3c | 16 | 1.0 | 6.7 | 9.0 | 166 |
| 02060110xx3c | 25 | 1.2 | 8.4 | 11.5 | 256 |
| 02060111xx3c | 35 | 1.2 | 9.7 | 12.5 | 352 |
| 02060112xx3c | 50 | 1.4 | 11.5 | 15.4 | 501 |
| 02060113xx3c | 70 | 1.4 | 13.2 | 17.5 | 692 |
| 02060114xx3c | 95 | 1.6 | 15.1 | 19.2 | 914 |
| 02060115xx3c | 120 | 1.6 | 16.7 | 21.2 | 1155 |
| 02060116xx3c | 150 | 1.8 | 18.6 | 23.9 | 1441 |
| 02060117xx3c | 185 | 2.0 | 20.6 | 25.9 | 1754 |
| 02060118xx3c | 240 | 2.2 | 23.5 | 28.9 | 2305 |
9) UL 1015
Application :
These cables are used for internal wiring of panels and electrical equipment. These are used as connection wire in machines laid in protective tubes and flexible pipes and also for motors and transformers.
Technical Data
- Standard: UL - Std. 758, CSA C 22.2 No. 210
- Nominal Voltage: 600V
- UL: type AWM 105°C 600V
- CSA: type AWM 105°C 600V
- Test Voltage (Spark Test):
- AWG 24: 4kV
- AWG 22 and 20: 5kV
- AWG 18 to 16: 6kV
- ≥ AWG 8: 7.5kV
Temperature range:
- Flexing -5°C to +105°C. Fixed installation -20°C to +105°C
- Temperature at Conductor: Max. UL and CSA : +105°C
- Bending Radius: Flexing 10 x cable ø’. Fixed installation 5 x cable ø Cable Construction
- Annealed plain or tinned stranded copper conductor.
- PVC - core insulation according to UL – Standard 1581, Class 43 Tab. 50.182, heat and damp resistant.
- Properties - Conditionally resistant to oils, solvents, acids and dyes.
- PVC self - extinguishing and flame retardant, test method to UL VW-1 and CSA FT 1 / FT 2
| Part Number | AWG No. | No. of Cores and Nominal Cross Sectional (Sq. mm) |
Approx. Cable Diameter (mm) |
Approx. Copper Weight (kg/km) |
Approx. Cable Weight (kg/km) |
| 06020101xx30 | 24 | 1 x 0.21 | 2.2 | 2.1 | 7 |
| 06020102xx30 | 22 | 1 x 0.33 | 2.4 | 3.5 | 9 |
| 06020103xx30 | 20 | 1 x 0.52 | 2.5 | 5.2 | 11 |
| 06020104xx30 | 18 | 1 x 0.82 | 2.8 | 8.3 | 16 |
| 06020105xx30 | 16 | 1 x 1.32 | 3.1 | 13.5 | 22 |
| 06020106xx30 | 14 | 1 x 2.08 | 3.5 | 20.4 | 31 |
| 06020107xx30 | 12 | 1 x 3.31 | 4.0 | 32.5 | 45 |
| 06020108xx30 | 10 | 1 x 5.26 | 4.6 | 51.7 | 68 |
| 06020109xx30 | 8 | 1 x 8.35 | 6.2 | 82.5 | 113 |
| 06020110xx30 | 6 | 1 x 13.3 | 8.0 | 132.1 | 184 |
| 06020111xx30 | 4 | 1 x 21.14 | 9.4 | 207.3 | 275 |
| 06020112xx30 | 3 | 1 x 26.65 | 10.2 | 262 | 339 |
| 06020113xx30 | 2 | 1 x 33.61 | 11.0 | 330.3 | 416 |
| 06020114xx30 | 1 | 1 x 42.38 | 13.0 | 416.9 | 543 |
| 06020115xx30 | 1/0 | 1 x 53.47 | 13.8 | 524.6 | 659 |
| 06020116xx30 | 2/0 | 1 x 67.4 | 15.2 | 661 | 820 |
| 06020117xx30 | 3/0 | 1 x 85.0 | 16.5 | 832.3 | 1013 |
| 06020118xx30 | 4/0 | 1 x 107.2 | 18.0 | 1050.9 | 1257 |
| 06020119xx30 | 250 kcmil | 1 x 127 | 20.0 | 1245 | 1507 |
| 06020120xx30 | 300 kcmil | 1 x 152 | 21.4 | 1489.8 | 1780 |
| 06020121xx30 | 350 kcmil | 1 x 178 | 22.6 | 1734.6 | 2048 |
| 06020122xx30 | 400 kcmil | 1 x 203 | 24.0 | 1989.9 | 2338 |
| 06020123xx30 | 500 kcmil | 1 x 254 | 26.0 | 2479.5 | 2868 |
10) UL 1007
Application :
These cables are used for internal wiring of switchboards, electronic and electrical equipment, e.g. households, radio of televisions, monitor and control desks.
These cables are used for internal wiring of switchboards, electronic and electrical equipment, e.g. households, radio of televisions, monitor and control desks.
Technical Data
- Standard: UL - Std. 758, CSA C 22.2 No. 210
- Nominal Voltage: 300V
- Test Voltage: 2000V Test Voltage (Spark Test)
- AWG 26-20: 4kV, AWG 10 -18 : 5kV
- Temperature Range: Flexible -5°C to +80°C. Fixed installation -20°C to + 80°C CSA – AWM I A/B
- Bending Radius: Flexing 10 x cable ø. Fixed installation 5 x cable ø Cable Construction
- Annealed plain or tinned stranded copper conductor.
- PVC – core insulation according to UL - Standard 1581, Class 43 Tab. 50.182, heat and damp resistant.
Properties
- Conditionally resistant to oils, solvents, acids and dyes
- PVC self - extinguishing and flame retardant, test method to UL VW-1 and CSA FT 1 / FT 2
| Part Number | AWG No. | No. of Cores and Nominal Cross Sectional (Sq. mm) |
Approx. Cable Diameter (mm) |
Approx. Copper Weight (kg/km) |
Approx. Cable Weight (kg/km) |
| 06030101xx30 | 26 | 1 x 0.14 | 1.3 | 1.4 | 3.0 |
| 06030102xx30 | 24 | 1 x 0.21 | 1.5 | 2.1 | 4.3 |
| 06030103xx30 | 22 | 1 x 0.33 | 1.6 | 3.5 | 5.8 |
| 06030104xx30 | 20 | 1 x 0.52 | 1.9 | 5.2 | 8.0 |
| 06030105xx30 | 18 | 1 x 0.82 | 2.2 | 8.3 | 12.0 |
| 06030106xx30 | 16 | 1 x 1.32 | 2.5 | 13.5 | 18.4 |
11) UL 1569
Application :
These cables are used for internal wiring of switchboards, electronic and electrical equipment, e. g. households, radio of televisions, monitor and control desks.
These cables are used for internal wiring of switchboards, electronic and electrical equipment, e. g. households, radio of televisions, monitor and control desks.
Technical Data
- Standard: UL - Std. 758, CSA C 22.2 No.210
- Nominal Voltage: 300V
- Test Voltage: 2000V Test Voltage (Spark Test)
- AWG 26-20: 4kV, AWG 10 -18: 5kV
- Temperature Range: Flexible -5°C to + 105°C.
- Fixed installation - 20°C to + 105°C CSA – AWM I A/B
- Bending Radius: Flexing 10 x cable ø. Fixed installation 5 x cable ø Cable Construction
- Annealed plain or tinned stranded copper conductor.
- PVC - core insulation according to UL - Standard 1581, Class 43 Tab. 50.182, heat and damp resistant.
Properties
- Conditionally resistant to oils, solvents, acids and dyes.
- PVC self - extinguishing and flame retardant, test method to UL VW-1 and CSA FT 1 / FT 2
| Part Number | AWG No. | No. of Cores and Nominal Cross Sectional(Sq. mm) |
Approx. Cable Diameter (mm) |
Approx. Copper Weight (kg/km) |
Approx. Cable Weight (kg/km) |
| 06040101xx30 | 26 | 1 x 0.14 | 1.3 | 1.4 | 3.0 |
| 06040102xx30 | 24 | 1 x 0.21 | 1.5 | 2.1 | 4.3 |
| 06040103xx30 | 22 | 1 x 0.33 | 1.6 | 3.5 | 5.8 |
| 06040104xx30 | 20 | 1 x 0.52 | 1.8 | 5.2 | 8.0 |
| 06040105xx30 | 18 | 1 x 0.82 | 2.1 | 8.3 | 12.0 |
| 06040106xx30 | 16 | 1 x 1.32 | 2.5 | 13.5 | 18.4 |
| 06040107xx30 | 14 | 1 x 2.08 | 3.0 | 20.4 | 27.3 |
| 06040108xx30 | 12 | 1 x 3.31 | 3.5 | 32.5 | 41.3 |
| 06040109xx30 | 10 | 1 x 5.26 | 4.1 | 51.7 | 62.8 |
12) UL 1275
Application :
PVC-insulated heavy wall lead wire, for use as hook – up wire and for internal wiring on refrigeration equipments.
Technical Data
PVC-insulated heavy wall lead wire, for use as hook – up wire and for internal wiring on refrigeration equipments.
Technical Data
- Standard: UL - Std. 758, CSA C 22.2 No. 210
- Temperature Range: -20°C to 105°C
- Nominal Voltage: 600V
- Test Voltage (Spark Test):
- AWG 18 to 16 : 6kV
- ≥ AWG 8: 7.5kV
- Bending Radius: Fixed installation 5 x cable ø Cable Construction Annealed plain or tinned stranded copper conductor.
- PVC – core insulation Type TW, Recognized Component QMTT2 heat and damp resistant.
| Part Number | AWG No. | No. of Cores and Nominal Cross Sectional (Sq. mm) |
Approx. Cable Diameter (mm) |
Approx. Copper Weight (kg/km) |
Approx. Cable Weight (kg/km) |
| 06050101xx30 | 18 | 1 x 0.82 | 4.3 | 8.3 | 27.4 |
| 06050102xx30 | 16 | 1 x 1.32 | 4.6 | 13.5 | 35.1 |
| 06050103xx30 | 14 | 1 x 2.08 | 5.0 | 20.4 | 44.9 |
| 06050104xx30 | 12 | 1 x 3.31 | 5.5 | 32.5 | 60.6 |
| 06050105xx30 | 10 | 1 x 5.26 | 6.1 | 51.7 | 84.5 |
13) UL 3289/3321/3173/3271/3344 XLPE CABLE
Application :
These cables have excellent resistance to abrasion, deformation, cut-through and chemical attack. This wire is widely used in appliances, transformers, electrical heating, motors, ballast, lighting and cooking equipment. Suitable for use as Appliance Wiring Material (AWM), coil leads and as Class B IEEE 130°C Class Motor Leads. Economical replacement for silicone rubber/glass braid insulated wire and cable.
Technical Data
These cables have excellent resistance to abrasion, deformation, cut-through and chemical attack. This wire is widely used in appliances, transformers, electrical heating, motors, ballast, lighting and cooking equipment. Suitable for use as Appliance Wiring Material (AWM), coil leads and as Class B IEEE 130°C Class Motor Leads. Economical replacement for silicone rubber/glass braid insulated wire and cable.
Technical Data
- Standard: UL - Std. 758. Complies to CSA No. 22.2 210 and 127
- Nominal Voltage: 600V
- Test Voltage (Spark Test):
- AWG 22 and 20: 5kV
- AWG 18 to 10: 6kV
- ≥ AWG 8: 7.5kV
- Temperature Range: Flexible -5°C to +150°C. Fixed installation -50°C to +150°C
- Temperature at Conductor: Max. UL : +150°C
- Bending Radius: Approx. 5 x cable ø
Temperature range:
- Annealed plain or tinned stranded copper conductor.
- XLPE insulation according to UL- Std. 1581 Table 50.232, Complies to CSA No. 22.2 210 and 127.
| AWG | Metric Cross Section Area (Sq. mm) |
No. of Strands/Strand Dia. (mm) |
Max. DC Conductor Resistance for ABC @ 20°C (Ω/km) |
Max. DC Conductor Resistance for ATC @ 20°C (Ω/km) |
Insulation Thickness (mm) |
Nominal Cable Diameter (mm) |
| 21 | 0.50 | 16/0.2 | 43.6 | 46.9 | 0.762 | 2.4 |
| 19 | 0.75 | 24/0.2 | 27.4 | 29.1 | 0.762 | 2.6 |
| 18 | 1.00 | 32/0.2 | 21.8 | 23.2 | 0.762 | 2.8 |
| 16 | 1.50 | 30/0.25 | 13.7 | 14.6 | 0.762 | 3.1 |
| 14 | 2.50 | 50/0.25 | 8.62 | 8.96 | 0.762 | 3.5 |
| 12 | 4.00 | 56/0.3 | 5.43 | 5.64 | 0.762 | 4.0 |
| 10 | 6.00 | 84/0.3 | 3.409 | 3.546 | 0.762 | 4.6 |
| 8 | 10.00 | 140/0.3 | 2.144 | 2.23 | 1.143 | 6.1 |
| 6 | 16.00 | 126/0.4 | 1.348 | 1.403 | 1.524 | 7.9 |
| 4 | 25.00 | 196/0.4 | 0.8481 | 0.882 | 1.524 | 9.1 |
| 2 | 35.00 | 276/0.4 | 0.5335 | 0.5548 | 1.524 | 10.7 |
| 1 | 50.00 | 296/0.4 | 0.423 | 0.4398 | 2.032 | 12.8 |
| 2/0 | 70.00 | 360/0.5 | 0.266 | 0.2766 | 2.032 | 14.8 |
| 3/0 | 95.00 | 480/0.5 | 0.211 | 0.2194 | 2.032 | 16.2 |
| 4/0 | 120.00 | 608/0.5 | 0.1673 | 0.1722 | 2.032 | 17.7 |